如果您对该产品感兴趣的话,可以
产品名称:
Galil运动控制卡集成驱动器
产品型号:
DMC-2143-DC24+AMP20540
产品厂商:
上海微敏自控技术有限公司北京办事处
产品文档:
无相关文档
简单介绍
Galil运动控制卡集成驱动器，Galil DMC-2143-DC24可选端子板、驱动器等附件介绍。
Galil运动控制卡集成驱动器
的详细介绍
| Galil运动控制卡集成驱动器详细说明 |
DMC-2143-DC24+AMP20540 AMP20540 AMP-205x0 2- and 4-axis 500W Servo Drives：
The AMP-20540 contains four transconductance, PWM amplifiers for driving brushless or brush-type servo motors.Each amplifier drives motors operating at up to 7 Amps continuous, 10 Amps peak,18–60 VDC (available voltage at the motor is 10% less). The gain settings of the amplifier are user-programmable at 0.4 Amp/Volt, 0.7 Amp/Volt and 1 Amp/Volt.The switching frequency is 60 kHz.The
amplifier offers protection for over-voltage,under-voltage, over-current, short-circuit and over-temperature.Theamplifier status can be read through the DMC-21x3 controller, and the BS command allows easy hall sensor set-up.A 2-axis amplifier board the AMP-20520 is also available. In a standard configuration the
DB-28040 I/O board will not install next to an AMP-20540, however the
AMP-20540 provides 8 uncommitted analog inputs with 12-bit ADC
(16-bit optional) DMC-2143-DC24+AMP20440 DMC-2143-DC24+AMP20542 | Galil DMC-2143-DC24四轴运动控制卡可选的附件规格 | | | | | | 端子板 | ICM-20100 | Provides D-sub connectors for cost-effective connection to external drives | | ICM-20105 | Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs | | ICM-20105T | Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs | | | | 驱动器 | AMP-20420 | Contains two 200W PWM drives for driving brush-type servo motors | | AMP-20440 | Contains four 200W PWM drives for driving brush-type servo motors. | | AMP-20341 | Contains four small 20W linear drives for driving small brush-type servo motors | | AMP-20520 | Contains two 500W PWM drives for driving brushless or brush-type servo motors | | AMP-20540 | Contains four 500W PWM drives for driving brushless or brush-type servo motors | | AMP-20542 | Contains four PWM drives for driving brushless or brush-type servo motors(3Amps Continuous, 5Amps peak at 18-60VDC). Software selectable for low inductance motors . | | SDM-20240 | Contains four small drives for stepper motors operating in full/half step mode | | SDM-20620 | Contains two drives for stepper motors operating in microstepping mode | | SDM-20640 | Contains four drives for stepper motors operating in microstepping mode | | | | 附件 | DB-28040 | Provides 40 additional digital I/O and eight analog inputs | | DB-28104 | Provides sinusoidal interpolation for Sin/Cos encoders |
|